Two-dimensional model of intrinsic magnetic flux losses in helical flux compression generators

Helical Flux Compression Generators (HFCG) are used for generation of mega-amper current and high magnetic fields. We propose the two dimensional HFCG filament model based on the new description of the stator and armature contact point. The model developed enables one to quantitatively describe the intrinsic magnetic flux losses and predict the results of experiments with various types of HFCGs. We present the effective resistance calculations based on the non-linear magnetic diffusion effect describing HFCG performance under the strong conductor heating by currents.Comment: 29 pages,18 figure

Strong Reduction of the Effective Radiation Length in an Axially Oriented Scintillator Crystal

We measured a considerable increase of the emitted radiation by 120 GeV/c electrons in an axially oriented lead tungstate scintillator crystal, if compared to the case in which the sample was not aligned with the beam direction. This enhancement resulted from the interaction of particles with the strong crystalline electromagnetic field. The data collected at the external lines of the CERN Super Proton Synchrotron were critically compared to Monte Carlo simulations based on the Baier-Katkov quasiclassical method, highlighting a reduction of the scintillator radiation length by a factor of 5 in the case of beam alignment with the [001] crystal axes. The observed effect opens the way to the realization of compact electromagnetic calorimeters or detectors based on oriented scintillator crystals in which the amount of material can be strongly reduced with respect to the state of the art. These devices could have relevant applications in fixed-target experiments, as well as in satellite-borne γ telescopes

A high-performance custom photodetection system to probe the light yield enhancement in oriented crystals

Scintillating homogeneous detectors represent the state of the art in electromagnetic calorimetry. Moreover, the currently neglected crystalline nature of the most common inorganic scintillators can be exploited to achieve an outstanding performance boost in terms of compactness and energy resolution. In fact, it was recently demonstrated by the AXIAL/ELIOT experiments that a strong reduction in the radiation length inside PWO, and a subsequent enhancement in the scintillation light emitted per unit thickness, are attained when the incident particle trajectory is aligned with a crystal axis within $\sim 1^\circ$. A SiPM-based system has been developed to directly probe this remarkable effect by measuring the scintillation light emitted by a PWO sample. The same concept could be applied to full-scale detectors that would feature a design significantly more compact than currently achievable and unparalleled resolution in the range of interest for present and future experiments

Development of an advanced modular setup for the on beam characterization of oriented crystals

Recently, the particle physics community has put an increasing effort in developing radiation detectors and equipment based on oriented crystals. A key feature that distinguishes an oriented crystal from the ordinary matter is the reduction of the radiation length (X0) seen by electrons, positrons and photons crossing the lattice along one of its symmetry axes. This effect has been experimentally observed only in the last few decades and with samples limited in number, composition and length. In order to characterize a variety of oriented crystals with a standardized procedure, the STORM Collaboration has developed an advanced modular setup, which allows to study the features of any crystal sample with both electron (or positron) and photon beams. This contribution describes the key elements of this setup, namely silicon strip tracking detectors, plastic scintillators, Silicon Photo-Multipliers (SiPMs) coupled to the crystal under test, a photon calorimeter and an electromagnetic spectrometer

Development of an advanced modular setup for the on beam characterization of oriented crystals

Recently, the particle physics community has put an increasing effort in developing radiation detectors and equipment based on oriented crystals. A key feature that distinguishes an oriented crystal from the ordinary matter is the reduc-tion of the radiation length (X0) seen by electrons, positrons and photons crossing the lattice along one of its symmetry axes. This effect has been experimentally ob-served only in the last few decades and with samples limited in number, composition and length. In order to characterize a variety of oriented crystals with a standardized procedure, the STORM Collaboration has developed an advanced modular setup, which allows to study the features of any crystal sample with both electron (or positron) and photon beams. This contribution describes the key elements of this setup, namely silicon strip tracking detectors, plastic scintillators, Silicon Photo -Multipliers (SiPMs) coupled to the crystal under test, a photon calorimeter and an electromagnetic spectrometer

A highly-compact and ultra-fast homogeneous electromagnetic calorimeter based on oriented lead tungstate crystals

Progress in high-energy physics has been closely tied to the development of high-performance electromagnetic calorimeters. Recent experiments have demonstrated the possibility to significantly accelerate the development of electromagnetic showers inside scintillating crystals typically used in homogeneous calorimeters based on scintillating crystals when the incident beam is aligned with a crystallographic axis to within a few mrad. In particular, a reduction of the radiation length has been measured when ultrarelativistic electron and photon beams were incident on a high-Z scintillator crystal along one of its main axes. Here, we propose the possibility to exploit this physical effect for the design of a new type of compact e.m. calorimeter, based on oriented ultra-fast lead tungstate (PWO-UF) crystals, with a significant reduction in the depth needed to contain electromagnetic showers produced by high-energy particles with respect to the state-of-the-art. We report results from tests of the crystallographic quality of PWO-UF samples via high-resolution X-ray diffraction and photoelastic analysis. We then describe a proof-of-concept calorimeter geometry defined with a Geant4 model including the shower development in oriented crystals. Finally, we discuss the experimental techniques needed for the realization of a matrix of scintillator crystals oriented along a specific crystallographic direction. Since the angular acceptance for e.m. shower acceleration depends little on the particle energy, while the decrease of the shower length remains pronounced at very high energy, an oriented crystal calorimeter will open the way for applications at the maximum energies achievable in current and future experiments. Such applications span from forward calorimeters, to compact beam dumps for the search for light dark matter, to source-pointing space-borne γ-ray telescopes, to decrease the size and the cost of the calorimeter needed to fully contain e.m. showers initiated by GeV to TeV particles

HE-LHC: The High-Energy Large Hadron Collider – Future Circular Collider Conceptual Design Report Volume 4

In response to the 2013 Update of the European Strategy for Particle Physics (EPPSU), the Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. The FCC study covered an energy-frontier hadron collider (FCC-hh), a highest-luminosity high-energy lepton collider (FCC-ee), the corresponding 100 km tunnel infrastructure, as well as the physics opportunities of these two colliders, and a high-energy LHC, based on FCC-hh technology. This document constitutes the third volume of the FCC Conceptual Design Report, devoted to the hadron collider FCC-hh. It summarizes the FCC-hh physics discovery opportunities, presents the FCC-hh accelerator design, performance reach, and staged operation plan, discusses the underlying technologies, the civil engineering and technical infrastructure, and also sketches a possible implementation. Combining ingredients from the Large Hadron Collider (LHC), the high-luminosity LHC upgrade and adding novel technologies and approaches, the FCC-hh design aims at significantly extending the energy frontier to 100 TeV. Its unprecedented centre-of-mass collision energy will make the FCC-hh a unique instrument to explore physics beyond the Standard Model, offering great direct sensitivity to new physics and discoveries

FCC-ee: The Lepton Collider: Future Circular Collider Conceptual Design Report Volume 2

In response to the 2013 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) study was launched, as an international collaboration hosted by CERN. This study covers a highest-luminosity high-energy lepton collider (FCC-ee) and an energy-frontier hadron collider (FCC-hh), which could, successively, be installed in the same 100 km tunnel. The scientific capabilities of the integrated FCC programme would serve the worldwide community throughout the 21st century. The FCC study also investigates an LHC energy upgrade, using FCC-hh technology. This document constitutes the second volume of the FCC Conceptual Design Report, devoted to the electron-positron collider FCC-ee. After summarizing the physics discovery opportunities, it presents the accelerator design, performance reach, a staged operation scenario, the underlying technologies, civil engineering, technical infrastructure, and an implementation plan. FCC-ee can be built with today’s technology. Most of the FCC-ee infrastructure could be reused for FCC-hh. Combining concepts from past and present lepton colliders and adding a few novel elements, the FCC-ee design promises outstandingly high luminosity. This will make the FCC-ee a unique precision instrument to study the heaviest known particles (Z, W and H bosons and the top quark), offering great direct and indirect sensitivity to new physics